Power Panel
The Roost Power Panel is designed with the true DIY builder in mind. Our approach is to provide a robust interface to connect to your power station that distributes power throughout your van. Along with attractive controls, this product provides you enough flexibility for you to build your electrical system to your own unique specifications. Add on an EZ Connect Cable to connect the Power Panel to your power station and you’re up and running charging your power station while easily powering the electrical needs of your van.
Features:
- Main Panel:
- Finished bamboo
- 18 slot, 30a distribution panel
- 120v AC Outlet
- Anderson plug connector outlets for DC charge lines (engine and solar)
- Pre-scribed for cutout for AC Extended Outlet
- Switch Plate:
- Finished Bamboo
- 3 toggle switches
- 3 dimmer switches
- 1 ‘cig plug’ w/ dual USB Charging Port installed
- Pre-scribed for cutout to integrate Espar Easy Start Pro heater controls
Roost Vans Power Panel:
Power Panel: The power panel consists of two pieces: The main distribution panel, and the switch panel. Depending on your desired installation, this allows you to locate the switch panel adjacent to or up to 6LF (of wire path) away. The most common application is to put the main panel inside a cabinet with your power station, with only the switch panel on the face of it.
Inbound Charge Line & Ground Kit (Recommended): This includes everything you need to connect your engine, shore, and solar power charge lines to the panel, and to ground them to the chassis. It includes the watertight plugs and connectors for shore power and solar power egress points.
End Use Connection Guide (Included): From our power panel’s distribution block you are ready to run wire pairs to whatever end use points your power needs require (lights, heaters, chargers, fans, fridge, etc..). We provide a diagram of the standard Roost layout (including recommended wire gauge, and fusing) which you are free to modify and customize as you like.
Options & Addons:
Goal Zero Yeti EZ Connect Cable: This 6' custom cable connects the Power Panel to a Goal Zero Link Alternator Charger and the solar charger and DC plug on a Yeti X Series (1000x, 1500x, 3000x, or 6000x).
EcoFlow EZ Connect Cable: This 6' custom cable connects the Power Panel to an EcoFlow 500w or 800w Alternator Charger and the solar charger and DC plug on a Delta 3 Max Plus.
Bluetti EZ Connect Cable: This 6' custom cable connects the Power Panel to a Bluetti Alternator Charger1 and the solar charger and DC plug on a Pioneer 150 (AC240).
Bare End EZ Connect Cable: This 6' custom cable connects the engine, solar recharge ports and DC loads of the Power Panel, and provides bare wire ends for you to crimp on a connector of your choosing for your custom needs.
AC Outlet Extension: If you would like an AC outlet elsewhere in your van powered by the inverter on your power station, this kit provides what you need. Provides an AC power inlet and outlet connected by 25' of wire. Install the inlet in the Power Panel, run the provided wire, and install the 120v AC outlet where desired. Then, connect your power stations inverter with the provided extension cord to the Power Panel.
Tech Support: Get a little additional help planning your system with discounted consultation time in conjunction with your purchase.
